language en

DSTV:Steel Construction Ontology

Revision:
1.0
Authors:
Victoria Jung, Lukas Kirner, Jyrki Oraskari, Timur Kuzu, Individualized Production RWTH Aachen
Download serialization:
JSON-LD RDF/XML N-Triples TTL
License:
http://insertlicenseURIhere.org
Visualization:
Visualize with WebVowl
Cite as:
Victoria Jung, Lukas Kirner, Jyrki Oraskari, Timur Kuzu, Individualized Production RWTH Aachen. DSTV:Steel Construction Ontology. Revision: 1.0.
Provenance of this page
Ontology Specification Draft

Abstract

dstv

Introduction back to ToC

This is a place holder text for the introduction. The introduction should briefly describe the ontology, its motivation, state of the art and goals.

Namespace declarations

Table 1: Namespaces used in the document
dstv<http://w3id.org/dstv#>
mod<https://w3id.org/mod>
owl<http://www.w3.org/2002/07/owl>
rdf<http://www.w3.org/1999/02/22-rdf-syntax-ns>
terms<http://purl.org/dc/terms>
xsd<http://www.w3.org/2001/XMLSchema>
schema-org<http://schema.org>
rdfs<http://www.w3.org/2000/01/rdf-schema>
ioc<http://w3id.org/ioc>
vann<http://purl.org/vocab/vann>
prov<http://www.w3.org/ns/prov>
default namespace<http://w3id.org/dstv>
dc<http://purl.org/dc/elements/1.1>

DSTV:Steel Construction Ontology: Overview back to ToC

This ontology has the following classes and properties.

Classes

Object Properties

Data Properties

DSTV:Steel Construction Ontology: Description back to ToC

This is a placeholder text for the description of your ontology. The description should include an explanation and a diagram explaining how the classes are related, examples of usage, etc.

Cross reference for DSTV:Steel Construction Ontology classes, properties and dataproperties back to ToC

This section provides details for each class and property defined by DSTV:Steel Construction Ontology.

Classes

Adjustment Processc back to ToC or Class ToC

IRI: http://w3id.org/dstv#AdjustmentProcess

A process in which existing properties are corrected or adjusted, e.g. alignment or re-measurement after initial fabrication.
has super-classes
Process c

Assemblyc back to ToC or Class ToC

IRI: http://w3id.org/dstv#Assembly

A production process where multiple components are joined or assembled into a final workpiece.
has super-classes
Production Process c
has sub-classes
Bolting c, Welding c

Beamc back to ToC or Class ToC

IRI: http://w3id.org/dstv#Beam

A Beam is usually a horizontal or almost horizontal component that can be loaded primarily by bending. For steel construction fabrication, the Beam must have a parametric profile and the volume geometry must consist of an extrusion. The extrusion direction must correspond to the x-direction of the local coordinate system.
Is defined by
https://standards.buildingsmart.org/IFC/DEV/IFC4/ADD2_TC1/OWL#IfcBeam
has super-classes
Profile c

Bendingc back to ToC or Class ToC

IRI: http://w3id.org/dstv#Bending

A process where material is plastically deformed into a curved shape.
has super-classes
Production Process c

Blind Hole Drillc back to ToC or Class ToC

IRI: http://w3id.org/dstv#BlindHoleDrill

A drilling process that creates a hole which does not pass completely through the material.
has super-classes
Drill c

Boltingc back to ToC or Class ToC

IRI: http://w3id.org/dstv#Bolting

An assembly process using bolts to join components.
has super-classes
Assembly c

Bottom Referencec back to ToC or Class ToC

IRI: http://w3id.org/dstv#BottomReference

A reference datum positioned at the bottom edge or surface of a component.
Is defined by
http://w3id.org/dstv#
has super-classes
Dimensional Reference c

Bottom Viewc back to ToC or Class ToC

IRI: http://w3id.org/dstv#BottomView

A view representing the bottom side of a workpiece.
has super-classes
Reference View c
is disjoint with
Front View c, Rear View c, Top View c

Columnc back to ToC or Class ToC

IRI: http://w3id.org/dstv#Column

A Column is a vertical structural member which often is aligned with a structural grid intersection. For steel construction fabrication, the Column must have a parametric profile and the volume geometry must consist of an extrusion. The extrusion direction must correspond to the x-direction of the local coordinate system.
Is defined by
https://standards.buildingsmart.org/IFC/DEV/IFC4/ADD2_TC1/OWL#IfcColumn
has super-classes
Profile c

Commentc back to ToC or Class ToC

IRI: http://w3id.org/dstv#Comment

An annotation or remark associated with a feature, process, or workpiece. Specifications between two entities can be exchanged here
has super-classes
General Information c
is in range of
has comment op

Countersink Hole Drillc back to ToC or Class ToC

IRI: http://w3id.org/dstv#CountersinkHoleDrill

A drilling process that creates a countersunk hole, typically for flush bolt heads.
has super-classes
Drill c

Creatorc back to ToC or Class ToC

IRI: http://w3id.org/dstv#Creator

Information about the person or organization that produced the workpiece.
has super-classes
General Information c
is in domain of
company dp, release dp, system dp, user dp
is in range of
has creator op

Cuttingc back to ToC or Class ToC

IRI: http://w3id.org/dstv#Cutting

A production process where material is removed or separated by cutting.
has super-classes
Production Process c
has sub-classes
Internal Contouring c

Defined Tolerancec back to ToC or Class ToC

IRI: http://w3id.org/dstv#DefinedTolerance

A specification of allowable deviation from nominal dimensions.
has sub-classes
Nominal Size c, Norm Reference c, Tolerance Classes c, Tolerance Limit c
is in domain of
has norm reference op, has tolerance limit op
is in range of
has defined tolerance property op

Depthc back to ToC or Class ToC

IRI: http://w3id.org/dstv#Depth

A dimensional value representing how deep a feature extends into the material.
has super-classes
Feature Values c

Diameterc back to ToC or Class ToC

IRI: http://w3id.org/dstv#Diameter

A dimensional value describing the width across a circular feature.
has super-classes
Feature Values c
is in range of
has diameter op

Dimensional Referencec back to ToC or Class ToC

IRI: http://w3id.org/dstv#DimensionalReference

A reference geometry or datum used to define dimensions relative to features.
has sub-classes
Bottom Reference c, Symmetrical Reference c, Top Reference c
is in range of
has dimensional reference op

Drillc back to ToC or Class ToC

IRI: http://w3id.org/dstv#Drill

A fabrication process to produce holes using a drill tool.
has super-classes
Production Process c
has sub-classes
Blind Hole Drill c, Countersink Hole Drill c, Threaded Hole Drill c, Through Hole Drill c

Featurec back to ToC or Class ToC

IRI: http://w3id.org/dstv#Feature

A geometric or functional element of a workpiece which represents a steel fabrication output element of a specific process
has sub-classes
Surface Feature c, Voiding Feature c
is in domain of
has diameter op, has dimensional reference op, has feature values op, has width op
is in range of
has feature op, has output element op

Feature Valuesc back to ToC or Class ToC

IRI: http://w3id.org/dstv#FeatureValues

A container class for planned, actual measured or nominal geometric dimensions of a feature.
has sub-classes
Depth c, Diameter c, Height c, Vertex X c, Vertex Y c, Width c
is in range of
has feature values op

Front Viewc back to ToC or Class ToC

IRI: http://w3id.org/dstv#FrontView

A view representing the front side of a workpiece.
has super-classes
Reference View c
is disjoint with
Bottom View c, Rear View c, Top View c

General Informationc back to ToC or Class ToC

IRI: http://w3id.org/dstv#GeneralInformation

A superclass for metadata or descriptive information about entities.
has sub-classes
Comment c, Creator c, Identifier c, Information c, Material c, Material Inventory c, Project c
is in range of
has general information op

Heightc back to ToC or Class ToC

IRI: http://w3id.org/dstv#Height

A dimensional value measuring vertical extent of a feature or profile
has super-classes
Feature Values c
is in range of
has height op

Identifierc back to ToC or Class ToC

IRI: https://standards.buildingsmart.org/IFC/DEV/IFC4/ADD2_TC1/OWL#Identifier

An identifier is an alphanumeric string which allows an individual thing to be identified. It may not provide natural-language meaning.
Is defined by
https://standards.buildingsmart.org/IFC/DEV/IFC4/ADD2_TC1/OWL#IfcIdentifier
has super-classes
General Information c
is in range of
identification op

Informationc back to ToC or Class ToC

IRI: http://w3id.org/dstv#Information

General metadata describing aspects of a workpiece.
has super-classes
General Information c
is in domain of
drawing number dp, order number dp, part number dp, position number dp, weightpm dp
is in range of
has information op

Internal Contouringc back to ToC or Class ToC

IRI: http://w3id.org/dstv#InternalContouring

A cutting process to produce internal shapes or voids within a workpiece.
has super-classes
Cutting c

Internal Countourc back to ToC or Class ToC

IRI: http://w3id.org/dstv#InternalCountour

An internal cutout (creating an opening) or external cutout (creating a recess) of arbitrary shape. The edges between cutting planes may be overcut or undercut, i.e. rounded.
has super-classes
Voiding Feature c

Materialc back to ToC or Class ToC

IRI: http://w3id.org/dstv#Material

A class representing physical material of a workpiece.
has super-classes
Material c
is in domain of
has material inventory op, material grade dp, material i d dp, material quality dp, supply condition dp
is in range of
has material op

Materialc back to ToC or Class ToC

IRI: https://standards.buildingsmart.org/IFC/DEV/IFC4/ADD2_TC1/OWL#Material

Material is a homogeneous or inhomogeneous substance that can be used to form elements (physical products or their components). Material is the basic entity for material designation and definition; this includes identification by name and classification (via reference to an external classification). Material must have a name (=material grade e.g. S355JR) and a category (=material e.g. Steel, Aluminium etc.). Material defines the planned/proposed material. The finally used material is stored in the property set.
has super-classes
General Information c
has sub-classes
Material c

Material Inventoryc back to ToC or Class ToC

IRI: http://w3id.org/dstv#MaterialInventory

Metadata about material stock, delivery, and supplier.
has super-classes
General Information c
is in domain of
material delivery dp, material stock dp, material supplier dp
is in range of
has material inventory op

Measurable Process Propertiesc back to ToC or Class ToC

IRI: http://w3id.org/dstv#MeasurableProcessProperties

Quantifiable attributes of a process, such as feed rate or speed.
has super-classes
Measurable Properties c
has sub-classes
Process Properties c

Measurable Profile Propertiesc back to ToC or Class ToC

IRI: http://w3id.org/dstv#MeasurableProfileProperties

Quantifiable properties of a profile or a feature
has super-classes
Measurable Properties c
has sub-classes
Profile Properties c

Measurable Propertiesc back to ToC or Class ToC

IRI: http://w3id.org/dstv#MeasurableProperties

Superclass grouping measurable features or properties.
has sub-classes
Measurable Process Properties c, Measurable Profile Properties c

Measurement Processc back to ToC or Class ToC

IRI: http://w3id.org/dstv#Scanning

A process where measurement equipment captures feature dimensions or geometry.
has super-classes
Quality Check c

Millingc back to ToC or Class ToC

IRI: http://w3id.org/dstv#Milling

A machining process using rotary cutting tools to remove material.
has super-classes
Production Process c

Mitrec back to ToC or Class ToC

IRI: http://w3id.org/dstv#Mitre

A process producing angled cuts (miter joints) between components.
has super-classes
Production Process c

Nominal Sizec back to ToC or Class ToC

IRI: http://w3id.org/dstv#NominalSize

The target dimension from which tolerances are defined.
has super-classes
Defined Tolerance c
is in range of
has nominalsize op

Norm Referencec back to ToC or Class ToC

IRI: http://w3id.org/dstv#NormReference

A reference to a normative standard defining tolerance classes.
has super-classes
Defined Tolerance c
is in range of
has norm reference op

Platec back to ToC or Class ToC

IRI: http://w3id.org/dstv#Plate

An Plate is a planar and often flat part with constant thickness. A plate may carry loads between or beyond points of support, or provide stiffening. The location of the plate (being horizontal, vertical or sloped) is not relevant to its definition. For steel construction fabrication, the Plate must have a profile and the volume geometry must consist of an extrusion.
Is defined by
https://standards.buildingsmart.org/IFC/DEV/IFC4/ADD2_TC1/OWL#IfcPlate
has super-classes
Workpiece c

Processc back to ToC or Class ToC

IRI: http://w3id.org/dstv#Process

The generic class process serves as the central element of the construction process ontology. It can represent a classical process or a subfield common in some definitions such as an activity or a task. Here it is used to describe processes in steel fabrication.
Is defined by
http://w3id.org/ioc#Process
has sub-classes
Adjustment Process c, Production Process c, Quality Check c
is in domain of
has input element op, has output element op

Process Propertiesc back to ToC or Class ToC

IRI: http://w3id.org/dstv#ProcessProperties

Specific measurable parameters of a process step.
has super-classes
Measurable Process Properties c

Production Processc back to ToC or Class ToC

IRI: http://w3id.org/dstv#ProductionProcess

A process directly involved in fabrication or modification of the workpiece.
has super-classes
Process c
has sub-classes
Assembly c, Bending c, Cutting c, Drill c, Milling c, Mitre c, Punching c, Sawing c, Signing c, Surface Treatment c

Profilec back to ToC or Class ToC

IRI: http://w3id.org/dstv#Profile

A linear structural member with a standardized cross-section.
has super-classes
Workpiece c
has sub-classes
Beam c, Column c

Profile Defc back to ToC or Class ToC

IRI: http://w3id.org/dstv#ProfileDef

Definition of a profile shape according to IFC standard.
Is defined by
http://w3id.org/dstv#
is in range of
has profile def op

Profile Propertiesc back to ToC or Class ToC

IRI: https://standards.buildingsmart.org/IFC/DEV/IFC4/ADD2_TC1/OWL#ProfileProperties

IFC-defined measurable properties associated with profile elements.
Is defined by
http://w3id.org/dstv#
has super-classes
Measurable Profile Properties c

Projectc back to ToC or Class ToC

IRI: http://w3id.org/dstv#Project

Metadata about the production or construction project.
has super-classes
General Information c
is in domain of
object dp, order dp, orderer dp
is in range of
has project op

Property Statec back to ToC or Class ToC

IRI: http://w3id.org/dstv#PropertyState

Represents an instance of a measurable property at a given time or condition.
is in domain of
generated at time dp, value dp
is in range of
has adjusted property op, has lower tolerance limit op, has measured property op, has planned property op, has upper tolerance limit op

Punchingc back to ToC or Class ToC

IRI: http://w3id.org/dstv#Punching

A process removing material using a punch press to create holes or shapes.
has super-classes
Production Process c

Quality Checkc back to ToC or Class ToC

IRI: http://w3id.org/dstv#QualityCheck

A process step intended to assess or validate conformity of features.
has super-classes
Process c
has sub-classes
Measurement Process c, Validation Process c

Rear Viewc back to ToC or Class ToC

IRI: http://w3id.org/dstv#RearView

A view representing the rear side of a workpiece.
has super-classes
Reference View c
is disjoint with
Bottom View c, Front View c, Top View c

Reference Viewc back to ToC or Class ToC

IRI: http://w3id.org/dstv#Reference

A general viewpoint or reference projection used for feature specification.
has sub-classes
Bottom View c, Front View c, Rear View c, Top View c
is in range of
has reference view op

Sawingc back to ToC or Class ToC

IRI: http://w3id.org/dstv#Sawing

A cutting process using a saw to separate material.
has super-classes
Production Process c

Signingc back to ToC or Class ToC

IRI: http://w3id.org/dstv#Signing

The process of marking or labeling components, e.g. engraving or stamping identification.
has super-classes
Production Process c

Surface Featurec back to ToC or Class ToC

IRI: http://w3id.org/dstv#SurfaceFeature

A surface feature is a modification at (onto, or into) of the surface of an element. Parts of the surface of the entire surface may be affected. The volume and mass of the element may be increased, remain unchanged, or be decreased by the surface feature, depending on manufacturing technology. However, any increase or decrease of volume is small compared to the total volume of the element. In steel fabrication each surface feature is representing a fabrication process step which manipulates the surface of the workpiece e.g. blasting, painting, marking.
Is defined by
https://standards.buildingsmart.org/IFC/DEV/IFC4/ADD2_TC1/OWL#IfcSurfaceFeature
has super-classes
Feature c

Surface Treatmentc back to ToC or Class ToC

IRI: http://w3id.org/dstv#SurfaceTreatment

Processes such as painting, galvanizing, or coating applied to the surface.
has super-classes
Production Process c

Symmetrical Referencec back to ToC or Class ToC

IRI: http://w3id.org/dstv#SymmetricalReference

A reference datum centered or mirrored along a symmetry plane.
Is defined by
http://w3id.org/dstv#
has super-classes
Dimensional Reference c

Threaded Hole Drillc back to ToC or Class ToC

IRI: http://w3id.org/dstv#ThreadedHoleDrill

A drilling process that creates a threaded hole with internal screw threads.
has super-classes
Drill c

Through Holec back to ToC or Class ToC

IRI: http://w3id.org/dstv#ThroughHole

A circular or slotted or threaded hole, typically but not necessarily of smaller dimension than what would be considered a cutout.
Is defined by
http://w3id.org/dstv#
has super-classes
Voiding Feature c

Through Hole Drillc back to ToC or Class ToC

IRI: http://w3id.org/dstv#ThroughHoleDrill

A drilling process that produces a hole through the entire workpiece.
has super-classes
Drill c

Tolerance Classesc back to ToC or Class ToC

IRI: http://w3id.org/dstv#ToleranceClasses

Classes categorizing tolerance ranges
has super-classes
Defined Tolerance c
is in domain of
additional tolerance 1 dp, additional tolerance 2 dp, basic tolerance dp
is in range of
pre defined type op

Tolerance Limitc back to ToC or Class ToC

IRI: http://w3id.org/dstv#ToleranceLimit

A specific upper or lower bound defined for a tolerance class.
has super-classes
Defined Tolerance c
is in domain of
has lower tolerance limit op, has nominalsize op, has upper tolerance limit op, pre defined type op
is in range of
has tolerance limit op

Top Referencec back to ToC or Class ToC

IRI: http://w3id.org/dstv#TopReference

A reference datum at the top edge or surface of a component.
Is defined by
http://w3id.org/dstv#
has super-classes
Dimensional Reference c

Top Viewc back to ToC or Class ToC

IRI: http://w3id.org/dstv#TopView

A view representing the top side of a workpiece.
has super-classes
Reference View c
is disjoint with
Bottom View c, Front View c, Rear View c

Validation Processc back to ToC or Class ToC

IRI: http://w3id.org/dstv#ValidationProcess

A specific quality check process verifying compliance to specifications.
has super-classes
Quality Check c

Vertex Xc back to ToC or Class ToC

IRI: http://w3id.org/dstv#VertexX

The X‑coordinate value of a vertex point defining a feature location.
has super-classes
Feature Values c

Vertex Yc back to ToC or Class ToC

IRI: http://w3id.org/dstv#VertexY

The Y‑coordinate value of a vertex point defining a feature location.
has super-classes
Feature Values c

Voiding Featurec back to ToC or Class ToC

IRI: http://w3id.org/dstv#VoidingFeature

A voiding feature is a modification of an element which reduces its volume. Such a feature may be manufactured in different ways, for example by cutting, drilling, or milling of members made of various materials, or by inlays into the formwork of cast members made of materials such as concrete. In steel fabrication each voiding element representation a fabrication process step, which significantly reduces the volume e.g. drilling, milling, sawing.
Is defined by
https://standards.buildingsmart.org/IFC/DEV/IFC4/ADD2_TC1/OWL#IfcVoidingFeature
has super-classes
Feature c
has sub-classes
Internal Countour c, Through Hole c

Weldingc back to ToC or Class ToC

IRI: http://w3id.org/dstv#Welding

An assembly process using fusion to join metal components.
has super-classes
Assembly c

Widthc back to ToC or Class ToC

IRI: http://w3id.org/dstv#Width

A dimensional value representing how wide a feature or profile is.
has super-classes
Feature Values c
is in range of
has width op

Workpiecec back to ToC or Class ToC

IRI: http://w3id.org/dstv#Workpiece

A physical element or component to be manufactured within a structural project.
Is defined by
https://standards.buildingsmart.org/IFC/DEV/IFC4/ADD2_TC1/OWL#IfcBuildingElement
has sub-classes
Plate c, Profile c
is in domain of
has creator op, has feature op, has general information op, has information op, has material op, has profile def op, has project op, identification op
is in range of
has input element op

Object Properties

has adjusted propertyop back to ToC or Object Property ToC

IRI: http://w3id.org/dstv#hasAdjustedProperty

Refers to a property that has been modified or recalculated based on measurements or processing results.
has domain
Feature c or Measurable Properties c or Process c
has range
Property State c

has commentop back to ToC or Object Property ToC

IRI: http://w3id.org/dstv#hasComment

Links a feature or process to a descriptive comment or annotation.
has domain
Feature c or Process c
has range
Comment c

has creatorop back to ToC or Object Property ToC

IRI: http://w3id.org/dstv#hasCreator

Indicates the entity (person or organization) responsible for creating the workpiece.
has domain
Workpiece c
has range
Creator c

has defined tolerance propertyop back to ToC or Object Property ToC

IRI: http://w3id.org/dstv#hasDefinedToleranceProperty

Connects a feature or process to a defined tolerance specification from a standard or design requirement.
has domain
Feature c or Measurable Properties c or Process c
has range
Defined Tolerance c

has diameterop back to ToC or Object Property ToC

IRI: http://w3id.org/dstv#hasDiameter

Defines the diameter of a circular feature, such as a hole
has domain
Feature c
has range
Diameter c

has dimensional referenceop back to ToC or Object Property ToC

IRI: http://w3id.org/dstv#hasReference

Defines a reference that a feature is based on.
has domain
Feature c
has range
Dimensional Reference c

has featureop back to ToC or Object Property ToC

IRI: http://w3id.org/dstv#hasfeature

Associates a workpiece with its geometric or functional features.
has domain
Workpiece c
has range
Feature c

has feature valuesop back to ToC or Object Property ToC

IRI: http://w3id.org/dstv#hasfeaturevalues

Points to concrete values that describe the feature, such as dimensions or angles.
has domain
Feature c
has range
Feature Values c

has general informationop back to ToC or Object Property ToC

IRI: http://w3id.org/dstv#hasgeneralinformation

Links a workpiece to general metadata such as date, client, or job description.
has domain
Workpiece c
has range
General Information c

has heightop back to ToC or Object Property ToC

IRI: http://w3id.org/dstv#hasHeight

Specifies the height of a feature or a profile.
has domain
Feature c or Profile Def c
has range
Height c

has informationop back to ToC or Object Property ToC

IRI: http://w3id.org/dstv#hasInformaiton

Links a workpiece to supplementary information.
has domain
Workpiece c
has range
Information c

has input elementop back to ToC or Object Property ToC

IRI: http://w3id.org/ioc#hasInputElement

Denotes the input workpiece to a process step.
has domain
Process c
has range
Workpiece c

has lower tolerance limitop back to ToC or Object Property ToC

IRI: http://w3id.org/dstv#hasLowerToleranceLimit

Specifies the lower boundary of an acceptable dimensional range.
has domain
Tolerance Limit c
has range
Property State c

has materialop back to ToC or Object Property ToC

IRI: http://w3id.org/dstv#hasMaterial

Specifies the material from which the workpiece is made.
has domain
Workpiece c
has range
Material c

has material inventoryop back to ToC or Object Property ToC

IRI: http://w3id.org/dstv#hasMaterialInventory

Connects a material to its inventory or stock information.
has domain
Material c
has range
Material Inventory c

has measured propertyop back to ToC or Object Property ToC

IRI: http://w3id.org/dstv#hasMeasuredProperty

Links a measurable property that was recorded during or after production.
has domain
Feature c or Measurable Properties c or Process c
has range
Property State c

has nominalsizeop back to ToC or Object Property ToC

IRI: http://w3id.org/dstv#hasNominalsize

Indicates the target or nominal size from which tolerances are derived.
has domain
Tolerance Limit c
has range
Nominal Size c

has norm referenceop back to ToC or Object Property ToC

IRI: http://w3id.org/dstv#hasNormReference

References a normative document or standard that defines the tolerance.
has domain
Defined Tolerance c
has range
Norm Reference c

has output elementop back to ToC or Object Property ToC

IRI: http://w3id.org/ioc#hasOutputElement

Indicates the result or product of a process, typically a new or modified feature.
has domain
Process c
has range
Feature c

has planned propertyop back to ToC or Object Property ToC

IRI: http://w3id.org/dstv#hasPlannedProperty

Specifies a property value that is planned during the design or production phase.
has domain
Feature c or Measurable Properties c or Process c
has range
Property State c

has positionop back to ToC or Object Property ToC

IRI: http://w3id.org/dstv#hasPosition

Indicates the position of a feature or process within the coordinate system of the workpiece.
has domain
Feature c or Process c
has range
Vertex X c or Vertex Y c

has profile defop back to ToC or Object Property ToC

IRI: http://w3id.org/dstv#hasProfileDef

Connects a workpiece or structural part to its profile definition, such as an I-beam or U-profile.
has domain
Workpiece c
has range
Profile Def c

has projectop back to ToC or Object Property ToC

IRI: http://w3id.org/dstv#hasProject

Associates the workpiece with a specific construction or production project.
has domain
Workpiece c
has range
Project c

has propertiesop back to ToC or Object Property ToC

IRI: http://w3id.org/dstv#hasProperties

Links an object to a set of technical or geometric properties relevant for manufacturing or analysis.
has domain
Feature c or Process c or Profile Def c
has range
Process Properties c or Profile Properties c

has reference viewop back to ToC or Object Property ToC

IRI: http://w3id.org/dstv#hasView

Points to the view of the profile where the process and feature is planned on.
has domain
Feature c or Process c
has range
Reference View c

has tolerance limitop back to ToC or Object Property ToC

IRI: http://w3id.org/dstv#hasToleranceLimit

Links a tolerance specification to its actual dimensional limit values.
has domain
Defined Tolerance c
has range
Tolerance Limit c

has upper tolerance limitop back to ToC or Object Property ToC

IRI: http://w3id.org/dstv#hasUpperToleranceLimit

Specifies the upper boundary of an acceptable dimensional range.
has domain
Tolerance Limit c
has range
Property State c

has widthop back to ToC or Object Property ToC

IRI: http://w3id.org/dstv#hasWidth

Defines the width of a feature or a profile.
has domain
Feature c
has range
Width c

identificationop back to ToC or Object Property ToC

IRI: https://standards.buildingsmart.org/IFC/DEV/IFC4/ADD2_TC1/OWL#Identification

Provides a unique identifier for the workpiece in compliance with IFC standards.
has domain
Workpiece c
has range
Identifier c

pre defined typeop back to ToC or Object Property ToC

IRI: http://w3id.org/dstv#preDefinedType

Refers to a predefined tolerance class.
has domain
Tolerance Limit c
has range
Tolerance Classes c

Data Properties

additional tolerance 1dp back to ToC or Data Property ToC

IRI: http://w3id.org/dstv#AdditionalTolerance1

Specifies the first additional tolerance value applied to the basic tolerance.
has domain
Tolerance Classes c
has range
literal

additional tolerance 2dp back to ToC or Data Property ToC

IRI: http://w3id.org/dstv#AdditionalTolerance2

Specifies the second additional tolerance value applied to the basic tolerance.
has domain
Tolerance Classes c
has range
literal

basic tolerancedp back to ToC or Data Property ToC

IRI: http://w3id.org/dstv#BasicTolerance

Defines the base tolerance value for a particular tolerance class.
has domain
Tolerance Classes c
has range
literal

companydp back to ToC or Data Property ToC

IRI: http://w3id.org/dstv#Company

Name of the company or organization that created the element.
has domain
Creator c
has range
literal

drawing numberdp back to ToC or Data Property ToC

IRI: http://w3id.org/dstv#DrawingNumber

Identifies the engineering or technical drawing number related to the workpiece.
has domain
Information c
has range
literal

generated at timedp back to ToC or Data Property ToC

IRI: http://www.w3.org/ns/prov#GeneratedAtTime

Timestamp when the property state or measurement was generated.
has domain
Property State c
has range
date time stamp

material deliverydp back to ToC or Data Property ToC

IRI: http://w3id.org/dstv#MaterialDelivery

Indicates the delivery status or date of the material.
has domain
Material Inventory c
has range
literal

material gradedp back to ToC or Data Property ToC

IRI: http://w3id.org/dstv#MaterialGrade

Specifies the classification or quality grade of the material.
has domain
Material c
has range
literal

material i ddp back to ToC or Data Property ToC

IRI: http://w3id.org/dstv#MaterialID

Unique identifier for the material used in the workpiece.
has domain
Material c
has range
literal

material qualitydp back to ToC or Data Property ToC

IRI: http://w3id.org/dstv#MaterialQuality

Describes the quality condition or specification of the material.
has domain
Material c
has range
literal

material stockdp back to ToC or Data Property ToC

IRI: http://w3id.org/dstv#MaterialStock

Amount of material currently in inventory or stock.
has domain
Material Inventory c
has range
literal

material supplierdp back to ToC or Data Property ToC

IRI: http://w3id.org/dstv#MaterialSupplier

Name or identifier of the supplier providing the material.
has domain
Material Inventory c
has range
literal

objectdp back to ToC or Data Property ToC

IRI: http://w3id.org/dstv#Object

Specifies the construction or production object name related to the project.
has domain
Project c
has range
literal

orderdp back to ToC or Data Property ToC

IRI: http://w3id.org/dstv#Order

Represents the production or project order identifier.
has domain
Project c
has range
literal

order numberdp back to ToC or Data Property ToC

IRI: http://w3id.org/dstv#OrderNumber

Unique number used to track or identify the order associated with the component.
has domain
Information c
has range
literal

ordererdp back to ToC or Data Property ToC

IRI: http://w3id.org/dstv#Orderer

Entity (person or organization) who placed the order for the project.
has domain
Project c
has range
literal

part numberdp back to ToC or Data Property ToC

IRI: http://w3id.org/dstv#PartNumber

Unique part number assigned to the workpiece or component.
has domain
Information c
has range
literal

position numberdp back to ToC or Data Property ToC

IRI: http://w3id.org/dstv#PositionNumber

Identifies the position number of the component within the assembly or drawing. Here, the part can be identified as either a main part or a sub-part.
has domain
Information c
has range
literal

releasedp back to ToC or Data Property ToC

IRI: http://w3id.org/dstv#Release

Specifies the date and time when the detailing of the steel element was officially released.
has domain
Creator c
has range
date time stamp

supply conditiondp back to ToC or Data Property ToC

IRI: http://w3id.org/dstv#SupplyCondition

Describes the delivery or supply condition of the raw material.
has domain
Material c
has range
literal

systemdp back to ToC or Data Property ToC

IRI: http://w3id.org/dstv#System

Refers to the system or application used during creation of the component or model.
has domain
Creator c
has range
literal

userdp back to ToC or Data Property ToC

IRI: http://w3id.org/dstv#User

Identifies the user who created or edited the element.
has domain
Creator c
has range
literal

valuedp back to ToC or Data Property ToC

IRI: http://schema.org#Value

Represents the actual value of a planned, measured, calculated or defined tolerance property.
has domain
Property State c
has range
literal

weightpmdp back to ToC or Data Property ToC

IRI: http://w3id.org/dstv#Weightpm

Weight per meter of the component or profile.
has domain
Information c
has range
literal

Legend back to ToC

c: Classes
op: Object Properties
dp: Data Properties
ni: Named Individuals

References back to ToC

Add your references here. It is recommended to have them as a list.

Acknowledgements back to ToC

The authors would like to thank Silvio Peroni for developing LODE, a Live OWL Documentation Environment, which is used for representing the Cross Referencing Section of this document and Daniel Garijo for developing Widoco, the program used to create the template used in this documentation.